Welcome to our On-line Catalog of Tin Ceilings

 

Tin Ceilings were introduced as an inexpensive way to cover cracked plaster ceilings. In the late 1800's, manufacturers of the ceiling panels began to press designs into the panels. At that point, the panels became very popular, as they create a dramatic decorative effect, are fireproof, resist moisture and are vermin proof. Tin ceilings have made a comeback and are once again a very popular architectural product.

Our line of tin ceiling products are produced from the original molds dating back to 1896. They are not reproductions of panels, which usually have less detail than the original panels. The panels are made of 22 gauge Electro-Galvanized Zinc-Coated Steel. You can select from three finishes: tin (i.e. plain steel plated with tin), pre-painted white, or plated with a coat of copper, brass, or chrome. Stainless Steel panels are also available for backsplash application. Tin ceiling panels are manufactured for either nailing up to a ceiling (or wall) or laying (dropping) in a grid system. For a nail-up application, the ceiling panels are 2' x 4' or 2' x 8'. The lay-in panels are 2' x 2' or 2' x 4'. Perforated panels made of aluminum are offered for acoustical applications and are presented almost in all designs and sizes. All tin ceilings products are normally available in stock and are shipped from New Jersey. The average lead-time for ground shipping is about 14 business days.

Application of tin ceilings is simple and the installation section provides you with do it yourself tips. Cover the ceiling area with 3/8" plywood, and the metal panels simply nail to the plywood. If you have cracked plaster or sprayed acoustic on the ceiling, there is no need to repair or remove it. The plywood will cover any defects. Do not nail the panels direct to a plaster or drywall ceiling since these materials have very poor nail holding properties.

Except design 508, the price of the panels does not vary according to the design and they are all priced the same for a specific finish. You can select from three finishes. All panels are available in the plain steel finish. All designs except pattern number 507, 508, and 5000 are also available in pre-painted white with a satin gloss, or plated brass, copper, or chrome. Custom painting is offered for orders more than 400 sq. ft. of ceiling panels. For tips to retain the clear look of the tin finish please look at the installation section.

We also offer another line of architectural decorative products in the area of ceiling and wall ornaments that are made of high-density polyurethane. We carry both brands: NMC, the largest and the best quality manufacturer in the world; and Focal Point, the American leading edge producer. If you are interested to learn more about this line, please visit our website at www.crownmoldings.net.

You are welcome to contact us with any questions you may have. We will be grateful to assist you with your technical concerns. Our business hours are 7:00 AM to 5:00 PM Monday through Fridays and 10:00 AM to 4:00 PM on Saturdays, Pacific Time.